The step of combine various boards with the base board:
1.First,board(at least 12mm)up the wall,than,we can start the next step
2.Put the base board(fallow the direction)on the wall,from bottom right-hand corner to up left-hand corner to combine them.
3.On the bottom and left side of the base board,also have the tenon to combine the base board on the other side.
4.Screw the base board on the wall.
5.To aimed at the base board and various board.
6.Use the rubber hammer knock around the various board together.
7.Hanger into the troughs from the cross enterances to make diversified.
8.Cross component locked the layer board can add the stability.
9.Cross screw into the troughs from the cross enterances to make diversified.
DIY on-the-spot fabrication