Large- The indexing head and the table are driven with a servo-motor.
- Easy to change the number of flutes (change gears are used on the former model.
- Table travel and traveling speed can be changed (Cannot be changed on the former model).
- The hob arbor is provided with a tail stock center for the support to increase the
holding rigidity of the hob arbor, thereby shortening the cycle time to one-sixth of the former model. - Borazon grinding wheel (standard equipment)
Diamond grinding wheels are available for carbide hobs (optional).
| Maximum workpiece diameter(mm) | Φ80 |
| Maximum grinding length(mm) | 100 |
| No. of flutes: | As required |
| Grinding wheel diameter(mm) | Φ125 |
| Grinding wheel speed(min-1) | 4,500 |
| Power consumption(kVA) | 2.1 |
| Floor area x height(mm) | 10009201720 |
| Machine weight(kg) | 650 |