LargeFunctions :
1. Security and convenience :
The lamps always light when people arrived
2. Energy saving:
Lamps will be off after people left.
Characteristics :
1. D.I.Y. design :
Easy for everyone to install and use.
2. Free lamps use:
All type of brand or lamp can be installed and detected ON/OFF.
3. Free adjustment:
Detective direction and angle can be free adjustment by extend sensor.
4. Stability :
Can be divided the light heat and human temperature
5. Sensitivity:
Detective distance 8 meters at 25°C, it will be detected only a small action or movement.
Installation Location:
Lamps with lampshades
Attentions:
Prevent humidity, prevent wrong voltage.
Model Specification PIR-505-1 All Direction Screw-in Extend Light Sensor
Power Supply AC110V / 220V ; 50HZ~60HZ
Load Tungsten lamp 60W /Provincial Electric lamp:23W
Power Consumption 13mA
Sensing Angle Free adjustment by extend sensor
Sensing Distance 25°C < Within 8 meters
Off Delay time Day : 5sec / Night : 60sec /Night : 300sec
Illumination Under 8LUX
Preparation Time After light brighten for 15~300 sec. When been electrified.
Dimension 6*6*6.5 CM
Weight 70g
Wiring Screw-in Pin
Temperature Difference Between 2 Points Above ＞3°C
Operating Temperature -5°C~45°C,23°F~113°F
Relative humidity Under 90%
Installation Location Any location with screw-in socket
Notes 1. Should avoid sunshine vent of air vent and other draft even installation location.
2. Avoid humidity.
3. Lamps not being bright lights of when LED bright lights, please replace lamps
PIR-505-1 D.I.Y ALL DIRECTION SCREW-IN LIGHT SENCER