TCY-TEC. CORP.

Product Characteristics:
1.A patent number: M353316
2.Electronic integrated molding, high-performance, high-purity aluminum specular reflection灯盘, specifications 600 (L) x600 (W) / 1200 (W) x65 (H), light steel frame or ceiling embedded
3.No glare, no grille, grille and a full discharge generated by shielding the rate of light to enhance the light output, more efficient than 90Lm / W.
4.Without grille, easy to clean, light card (Block) to a fixed knob mortise-type cards are not falling.
5.Low-voltage quick-start, starter-free, long life, non-flash frequency, to protect their eyesight.
6.Lamp flame-retardant materials used plastic packages, in line with fire safety.
7.Ballast IC modular stability, lighting is one of the world adopted the first comprehensive eco-friendly materials of high purity aluminum.
8.14/28W with three-wavelength fluorescent lamp energy saving
9.A comprehensive alternative to the original traditional power-saving lamps T8/T9/20w x 4 up to 65%.
10.Comprehensive alternative T5/14w x 4 Electronic lights, a power up to 50%.
11.A comprehensive alternative to electronic T5/14w x 2 aluminum retro-reflector lamps and illumination to increase> 15%.
12.T5 energy saving lamp will not use the end of the traditional ballast flicker, and the phenomenon of sustained power.
13.T5 fluorescent tubes, mercury is low, the service life of up to 20,000 hours.
14.Enhance the corporate image in line with environmental protection, energy saving, reducing carbon.
Note：TCY products by R & D in 2009 was an outstanding business manager of the Republic of China Association of the 12th jinfeng Award.

TCY Electronic Ballast Specifications:
1.The application of a single lamp T5/T8 lamp voltage 92V
2.Input current 0.45-0.9A/THD <18%
3.Input voltage 95V/265V (60HZ)
4.Input power 30-58W
5.Lamp current 0.135-0.27A PF ≧ 0.98
6.Surface temperature <60 degrees C

T5 tubes used in Taiwan:
1.Low mercury content 3mg → 1.6mg high color of his RA80 →> RA90
2.High output lumens Lm / w 87-96.
3.High life expectancy 20,000 hrs (lihting) → 50,000 hrs (TV backlight)
4.Beam to maintain a high rate of 96.3% (2000hrs: 96%, 5000hrs: 94% 10000hrs: 94%, 15000hrs: 90%, 20000hrs: 88%)
Lights the shortcomings of other brands:
1.Commercial license 14Wx4 mirror light steel frame, with grid shading, light output of a low utilization rate
2.Poor rate of monolithic reflective paint, the lowest utilization rate of upward flux, energy saving effect of about 30%
3.Failed to take full advantage of upward flux, coupled with lower light output grid shading, total light source of about 50% of the low utilization rate.
4.Commercial licenses are T5/14W x 2 aluminum retro-reflector, a grating shading to reduce light output
5.Reflective aluminum 0.10-0.15mm thickness aluminum for long-term use is not easy to clean easy to atomization, SHI Yi little deformation
6.Anodizing is a plating, electroplating, high-pollution process.
7.Unable to prevent salt injury
Reference information: extracted from the Industrial Technology Research Institute Energy and Resources Institute
Use of fluorescent lighting system to the highest office, the straight tube fluorescent lamps are the most popular, but with the high frequency of small diameter fluorescent tube development, as well as the close-type ring-shaped lamps in high efficiency, changes in appearance more circumstances, the application of fluorescent home in Japan is also very universal.
Office of the traditional fluorescent lamp, a total of light, reflection, and cover the three-part grille, light box for the lighting of the supporting structure can be divided into embedded, suspended ceiling with three categories; reflector for the main functions of optical design with can be divided into for the proliferation of, and specular reflection point, and so on. In accordance with the reflective properties of the light reflector is designed with light and lighting control based on optical functions at the same time the efficiency of the lamps have a decisive impact.
Reflector material for the metal used to mirror (Specular), Sand (Sputter), or Matte (Matte) to deal with. As for the main functions of grid body to block the direct light source to reduce glare and increase the optical effect, the main types can be broadly classified as: a circular grid, shading louvers, holes of different shapes such as mesh grille.
Grille lamps can reduce the glare, but on the other hand, because of shading and lighting to reduce light output. Therefore, the efficiency of this type of lamps are generally not more than 50%, in order to enhance the efficiency of lamps, reflective cover material with the grating reflectivity as the key.